Biosystems PhD Ultra Manual de usuario descargar pdf (Pagina 12)

11

The software will notify you when the

process is complete.

Click “Finish”.

2.8.2 Dock screens

Once the connection is made, the dock

will display its software version number,

serial number, and the calibration gas

type and expected calibration gas

concentration whenever it is plugged in.

The IQ6 Dock is ready to go once it

displays “READY” and begins scrolling

through the gas types by port along with

the time, date and number of records

stored.

↓

↓

↓

↓

↓

The IQ Express is ready to go once it

alternates between the following two

screens.

If the IQ6 Dock is connected to a PC via

Ethernet or USB, an asterisk is shown to

the right of the time.

3. Software

To launch the IQ Express Software, click

on the IQ Express icon on your PC’s

desktop.

Note: The Database Manager must be

launched prior to launching the IQ6

Software to establish a database.

The software may also be launched by

accessing the program through the start

button and selecting Program Files /

Biosystems / IQ6 / IQ6 (unless another

location was specified during the

installation).

The following screen will be shown once

the software is launched. Note that the

instrument will not be charged in the

dock if the No Change option is selected

and the instrument is powered on when

entering the dock.

The screen is divided into right and left

sides. The left side gives the status of

the docks that are currently installed and

recognized. At the top of the right side of

the screen there is a tab for each dock

that is currently installed and recognized.

Within each dock tab are two sub-tabs:

one for dock controls and one that shows

the calibration status and details for the

instrument that is currently in the dock.

3.1 Dock Status (USB

Connection)

Note: If the dock is connected to the

PC via Ethernet, see the Status

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

Comentarios a estos manuales

Sin comentarios