6
In the event of an
alarm condition it is important to follow
established procedures. The safest
course of action is to immediately
leave the affected area, and to return
only after further testing determines
that the area is once again safe for
entry. Failure to immediately leave the
area may result in serious injury or
death.
1.3.2 Silence warning alarms
The ToxiLtd’s audible and vibrating (if so
equipped) alarms can be turned off during
an alarm condition by pressing the MODE
button if this function has been enabled
with BioTrak software. The visual warning
alarm light and readings will continue to
indicate the alarm.
1.3.3 Calibration due notices
The ToxiLtd includes calibration due
notices that are displayed when the
instrument is due for calibration.
For more information on the calibration
due notices, see section 2.3.
1.3.4 Low battery alarms
The battery in the ToxiLtd is designed to
power the instrument for a full two years
from the date of activation as long as the
instrument has not exceeded 20 hours in
alarm. In the unlikely event that the
battery runs out of power prior to the
completion of the 2-year operational
lifespan, the ToxiLtd includes two battery
warning alarms that are activated when
the battery voltage is reduced to specific
levels.
For more details on the battery alarm,
see section 2.4.
1.3.5 Heartbeat Feature
A blinking heart is an active indicator,
notifying the user that the instrument is
operating normally.
1.4 Design components
Case: The instrument is enclosed in a
solid PC (polycarbonate) case with TPE
(rubber) overmold.
Front face: The front face of the
instrument houses the LCD display,
MODE button, sensor port, LED and
audible alarm port.
LCD display: The liquid crystal display
(LCD) displays gas readings, messages
and other information.
Visual alarm (LED) / IrDA port: A bright
red LED (Light-Emitting Diode) alarm light
provides a visual indication of the alarm
state. The LED also functions as the IrDA
port.
MODE button: The large push-button on
the front of the instrument is called the
MODE button. The MODE button is used
to turn the ToxiLtd on and off, to view the
MAX screen and to initiate the automatic
calibration sequence.
Figure 1. Exterior front view.
Sensor port: The sensor port is located
at the upper left corner of the instrument.
A filter prevents unwanted contaminants
from entering the sensor.
Audible alarm orifice: A cylindrical
resonating chamber contains the loud
audible alarm.
Bottom surface: The belt clip attaches to
the bottom surface of the instrument.
1.5 Standard accessories
Standard accessories with every ToxiLtd
include installed sensor and battery,
reference manual and calibration/sample
draw adapter.
1.6 Value pack kits
ToxiLtd value packs include all standard
accessories, calibration fittings, 34-liter
cylinder of calibration gas, and fixed flow
rate regulator in a foam-lined, hard-shell
carrying case.
(60 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales